How to Make Your Own Dog Mask – The Basics

In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks that you can use.

If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the home, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup that will look a little scary at first, but it is actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so you get something which resembles a cone. The most important thing here is to be realistic with what kind of paper plate which you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so you can make certain that nothing will leak when you put the mask on. Make sure the edges are cut so the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wash away any excess paint once you’re done, so you don’t end up with smudges or smears on your dog.

Then it’s time to glue the mask onto your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can start to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and then fold it over. Be certain it’s quite strong and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged firmly onto the face of your dog. Do not make the folds too large or else it might look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Be sure that the ears are flat and make sure that it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask as your pet security, you will need to do some sanding to be http://www.leaninfo.ru/?p=25421 certain it’s secure on your dog. You can do this by sanding off any excess paper which might have been removed from your mask.